Burner clicks but won't light, a coil that stays cold, or a glass cooktop throwing error codes — Naperville Appliance Repair sends a licensed technician to your door the same day you call, with a flat price before any work starts.
Fast. Honest. Local to Naperville.
Need the oven fixed too — not heating, wrong temperature, or a control board issue?
See Oven Repair →Gas, electric coil, and induction — your technician arrives with common igniters, switches, and elements already on the truck.
The most common gas stove complaint — usually a dirty or faulty igniter, moisture in the burner assembly, or worn wiring.
A failed heating element or a bad infinite switch is typically behind a coil or radiant burner that stays cold.
Error codes, unresponsive touch controls, and surface element failures on Bosch, GE, and Thermador induction units.
Gas valve and ignition-system work handled by technicians trained specifically for gas appliances.
Fan not running, light out, or excess noise — range hood repair while we're already under the hood.
Restaurant ranges and commercial cooktops throughout Naperville and DuPage County.
No stock-photo promises — this is what a stove or range repair visit actually looks like, from diagnosis to the finished fix.
Professional-grade ranges need technicians who've actually worked on them. We service the high-end brands common in Naperville's newer builds and remodeled kitchens — dual-fuel ranges, commercial-style burners, and integrated range hoods included.
Most Naperville stove and range calls are one visit — parts stay stocked on the truck.
Tell us gas, electric, or induction, the brand, and which burner or control is acting up.
We test each igniter, element, switch, and control board to isolate the actual fault.
You see the full parts-and-labor price in writing before we touch anything.
Every burner is lit and checked before we pack up, backed by a 90-day warranty.
Usually a dirty or faulty igniter — moisture from cleaning or a boil-over is a common trigger.
Points to a wet or dirty igniter or burner cap that needs cleaning or replacing.
A failed heating element or a bad infinite switch controlling that burner's power.
Often a sensor fault or a control board issue — the exact code helps narrow down the fix fast.
A worn ignition switch or a weak spark module unable to generate enough voltage to light reliably.
Could be the fan motor, the switch, or a wiring issue — checked alongside your stove repair.
Every job gets its own written quote after diagnosis — these are typical ranges to help you plan, not a fixed price for your unit.
| Repair | Typical range | Common driver |
|---|---|---|
| Most burner repairs (parts + under 1 hr labor) | Under $50 in parts | Dirty contacts, minor cleaning, small part swap |
| Professional igniter replacement | $150 – $250 | Burner clicks but won't light |
| Infinite switch / heating element (electric) | $130 – $220 | Coil or radiant burner won't heat |
| Induction surface element / control board | $200 – $550 | Error codes, unresponsive touch controls |
| Range hood fan or switch repair | $100 – $220 | Fan not running, light out, excess noise |
Ranges reflect typical parts-and-labor costs across the industry. Your exact price depends on the brand, model, and the part that failed — confirmed in writing before we start.
Consumer Reports recommends replacing when the repair cost exceeds 50% of a comparable new unit's price. We'll give you a straight answer, not a sales pitch.
Most burner repairs use under $50 in parts and under an hour of labor. A professional igniter replacement typically runs $150-$250. You'll get a flat, written quote for your specific stove after diagnosis — before any repair starts.
That's almost always a dirty or faulty igniter, sometimes caused by moisture from recent cleaning or a boil-over. It's usually diagnosed and fixed in one visit.
Yes, including Bosch, GE, and Thermador induction units — error codes, unresponsive touch controls, and surface element failures.
Yes. We service Viking, Thermador, Wolf, Sub-Zero, and Miele ranges, including dual-fuel and commercial-style burner setups.
If the repair cost is under half the price of a comparable new unit and it's under about 12 years old, repair usually makes sense. If multiple burners are failing or an induction control board has gone on an older unit, replacement is often the better value.
We handle both — if your oven also needs attention (not heating, wrong temperature, control board), check our dedicated oven repair page or just mention it when you call and we'll cover everything in one visit.
Yes, we service commercial stoves, ranges, and range hoods for restaurants and multi-unit properties throughout Naperville and DuPage County.
Call now for a same-day appointment window, or book online and we'll confirm within the hour.
Naperville